TMS 2019 148th Annual Meeting Exhibition Supplemental Proceedings 1st edition by Metals Materials Society 3030058616 9783030058616

TMS 2019 148th Annual Meeting Exhibition Supplemental Proceedings 1st edition by Metals Materials Society  – Ebook PDF Instant Download/DeliveryISBN: 3030058616, 9783030058616

Full download TMS 2019 148th Annual Meeting Exhibition Supplemental Proceedings 1st edition after payment.

Product details:

ISBN-10 :  3030058616 

ISBN-13 :  9783030058616

Author:  Metals Materials Society 

This collection features papers presented at the 148th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.                   

TMS 2019 148th Annual Meeting Exhibition Supplemental Proceedings 1st table of contents:

Part I. 2019 International Metallurgical Processes Workshop for Young Scholars (IMPROWYS 2019)
Ab Initio Molecular Dynamics Study on the Dissolution of Interfacial Iron Oxides in Hot Compressive Bonding Combined with Experiments
Effect of MgO Content on the Properties of Magnesia Fluxed Pellets
Numerical Simulation of Three-Phase Flow of Gas-Stirring Micro-phenomenon During Ladle Furnace Process
The Effect of pH and Temperature During Carbonation Process on Spent Die Cleaning Solution from Aluminium Extrusion Industry
Improvement of Center Segregation in Continuously Cast Blooms by Convex Roll Soft Reduction
Effects of a Top-Down Flow on Gas–Solid Fluidization State in a Bubble Fluidized Bed
Development of Bio-treated Oil Palm Fiber Reinforced Kaolin Matrix Composites for Building Bricks Application
Effect of Roll Surface Profile on Thermal-Mechanical Behavior of Continuously Cast Bloom in Soft Reduction Process
Thermodynamic Study on Substitution of CO2 for Ar or O2 in AOD Smelting Process
Part II. 2019 Symposium on Functional Nanomaterials: Synthesis, Integration, and Application of Emerging Nanomaterials
Recent Progress on Metal Oxide Semiconductor Thin Film Transistor Application via Atomic Layer Deposition Method
Adsorption of Fluoride Gases in Aluminum Production by Using of Nanotechnology
Experimental Study on Competitive Adsorption of SF6 Decomposed Components on Nitrogen-Doped TiO2 Nanotubes Sensor
Fabrication of Hardystonite Nano-bioceramic Coating on 306L Stainless Steel Substrate Using Electrophoretic Method and Evaluation of Its Corrosion Resistance to Improve Medical Performance
Fabrication of Monodispersed Needle-Sized Hollow Core Polystyrene Microspheres
Hydrangea-Like VS4 Microspheres: A Novel Structure Material for High-Performance Electrochemical Capacitor Electrode
Preparation and Properties of Novel Graphene Composites
Synthesis and Characterization of Silver Nanoparticles Using Simple Polyol Method
Part III. Additive Manufacturing and Welding: Physical and Mechanical Metallurgy of Rapidly Solidified Metals
Differentiating Defect Types in LENSTM Metal AM via In Situ Pyrometer Process Monitoring
Laser-Additive Repair of Cast Ni–Al–Bronze Components
Comparative Austempering Response Between Weld Metals of ADI Weldments With and Without Cerium Addition
Effects of Beam Oscillation on Porosity and Intermetallic Compounds Formation of Electron Beam Welded DP600 Steel to Al-5754 Alloy Joints
Effects of Ultrasonic Micro-forging on 304 Stainless Steel Fabricated by WAAM
Interface Microstructural Characterization of Titanium to Stainless Steel Dissimilar Friction Welds
Mechanical Property Characterization of Single Scan Laser Tracks of Nickel Superalloy 625 by Nanoindentation
Metallurgical Characteristics of Laser Peened 17-4 PH SS Processed by LENS Technique
Part IV. Additive Manufacturing for Energy Applications
Prototyping of a Laboratory-Scale Cyclone Separator for Biofuel Production from Biomass Feedstocks Using a Fused Deposition Modeling Printer
Part V. Additive Manufacturing of Metals: Applications of Solidification Fundamentals
Phase-Field Modeling of Microstructure Evolution of Binary and Multicomponent Alloys During Selective Laser Melting (SLM) Process
Phase-Field Simulation of Microstructure Evolution in Direct Metal Laser Sintered AlSi10Mg
Laser Interaction with Surface in Powder Bed Melting Process and Its Impact on Temperature Profile, Bead and Melt Pool Geometry
Evolution of a Gradient Microstructure in Direct Metal Laser Sintered AlSi10Mg
Finite Element Analysis of Particle Pushing During Selective Laser Melting of AlSi10Mg/AlN Composites
Numerical Simulation on the Single-Crystal Grain Structure of GH4169 Superalloy Steel in the Spiral Grain Selector Using Procast Software
Powder Packing Density and Its Impact on SLM-Based Additive Manufacturing
Part VI. Additive Manufacturing of Metals: Fatigue and Fracture III
About a Digital Twin for the Fatigue Approach of Additively Manufactured Components
Effect of the Surface Finish on the Cyclic Behavior of Additively Manufactured AlSi10Mg
Effect of Heat Treatments on Fatigue Properties of Ti–6Al–4V and 316L Produced by Laser Powder Bed Fusion in As-Built Surface Condition
Fracture Toughness and Fatigue Strength of Selective Laser Melted Aluminium–Silicon: An Overview
The Effect of Heat Treatment and Alloying of Ni–Ti Alloy with Copper on Improving Its Fatigue Life
Effect of Adding Yttrium on the Inclusion Modification and Impact Toughness of E36 Shipbuilding Steel
Part VII. Additive Manufacturing of Metals: Microstructural Evolution and Phase Transformations
Influence of Nitrogen on Microstructure, Mechanical Properties and Martensitic Phase Transformation of Co–26Cr–5Mo–5W Alloys by Selective Laser Melting
The Morphology, Crystallography, and Chemistry of Phases in Wire-Arc Additively Manufactured Nickel Aluminum Bronze
Microstructure Evolution in Direct Metal Laser Sintered Corrax Maraging Stainless Steel
The Microtexture and Tensile Properties of Continuous-Wave and Quasi-Continuous-Wave Laser Powder-Deposited Inconel 718
Part VIII. Additive Manufacturing: Materials Design and Alloy Development
Alloy Design for Biomedical Applications in Additive Manufacturing
Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry
Mechanical Behavior and Microstructure of Porous Ti Using TiC as Reinforcement
Processing of Haynes® 282® Alloy by Laser Powder Bed Fusion Technology
Part IX. Advanced High-Strength Steels III
Tensile Deformation Behavior of 1 GPa-Grade TRIP-Aided Multi-microstructure Steels Studied by In Situ Neutron Diffraction
Development of Advanced High-Strength Steels for Automobile Applications
Effect of Carbon Content on Strengthening Behavior with Grain Refinement on Lath Martensite Structure
Assessment of the Strengthening Mechanisms Operating in Microalloyed Steels During Cyclic Deformation Using High-Resolution Electron Backscatter Diffraction
Effect of Niobium on Microstructure and Mechanical Properties of Nb–Ti Microalloyed Carbide-Free Bainitic Steels
Effect of Inclusions Modified by Y-Based Rare Earth on the Corrosion Behavior of EH36 Shipbuilding Steel
Microstructure and Mechanical Properties of Intercritical Annealed Multiphase Ultrahigh Strength Steel
The Effect of Ni and Cu Addition on Mechanical Behavior of Thermomechanically Controlled Processed HSLA X100 Steels
Part X. Advanced Magnetic Materials for Energy and Power Conversion Applications
Optimization of Magnetocaloric Properties of Ball-Milled La(Fe,Co,Si)(H,C)
Production of High-Resistivity Electrical Steel Alloys by Substitution of Si with Al and Cr
Nanocrystalline Multifunctional Pr–Co Compounds
Part XI. Advanced Microelectronic Packaging, Emerging Interconnection Technology, and Pb-free Solder
A Study on Electrical Conductivity of Micro Friction Stir-Welded Dissimilar Sheets for Hybrid Electric Vehicles (HEVs)
Micro-structure and Properties of Cu–0.3 wt%Ag Alloy Ultra-Fine Wires
Length Scale of the Cellular Microstructure Tailoring Tensile Properties of Zn–20 wt%Sn–2 wt%Cu Solder Alloy
Effect of Ag on the Mechanical Properties of Bi–Ag Solder Alloys by the Single-Lap Shear Test Method
Part XII. Advances in Computational Methods for Damage Mechanics and Failure Phenomena
Parametrically Homogenized Continuum Damage Mechanics (PHCDM) Models for Composites from Micromechanical Analysis
Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach
Part XIII. Advances in Surface Engineering
Corrosion Study of Boron Nitride Nanosheets Deposited on Copper Metal by Electrophoretic Deposition
Effects of Process Parameters on the Zirconia Coating Prepared by Sol-Gel and Electrodeposition Process
The Study of Slurry Erosion Wear Behaviour of Coal Bottom Ash Slurry Handling Pipeline
Wear Characterization of Cemented Carbide Multipoint Cutting Tool Machining AISI 4140 at High Cutting Speed: Criteria for Materials Selection
Dry Sheet Metal Forming Through Selective Oxidized Tool Surfaces
Effect of Process Parameters on Surface Properties of Laser-Hardened Cast Iron
On Improvement in Surface Integrity of µ-EDMed Ti–6Al–4V Alloy by µ-ECM Process
Corrosion and Wear Resistance of PTFE-Al2O3 Coatings Deposited on Aluminum Alloy by a Microblasting Process
Part XIV. Algorithm Development in Materials Science and Engineering
Numerical Simulation of Ti6–Al4–V Alloy Diffusion Bonding Process Based on Molecular Dynamics
Part XV. Alloys and Compounds for Thermoelectric and Solar Cell Applications VII
Custom Pyrolytic Graphite–Steel Thermocouple for High-Temperature Measurements
Part XVI. Biological Materials Science
3D Contact and Strain in Alveolar Bone Under Tooth/Implant Loading
Shear-Punch Testing of Human Cranial Bone and Surrogate Materials
Investigation of Biodegradable Zn–Li–Cu Alloys for Orthopaedic and Cardiovascular Applications
Low-Temperature Air Plasma Modification of Electrospun Soft Materials and Bio-interfaces
Accumulation of Biofilm on Ti–6Al–4V Alloy Fabricated Using Additive Layer Manufacturing
Copper Recovery from Printed Circuit Boards from Smartphones Through Bioleaching
Dependence of the Ferrovanadium Power as Additive on Mechanical Property in Porous Ti
Effect of Compaction Pressure on Porosity and Mechanical Properties of Porous Titanium as Bone Substitute Materials
The Effect of Milling Time on Structural, Friction and Wear Behavior of Hot Isostatically Pressed Ti–Ni Alloys for Orthopedic Applications
Part XVII. Bulk Metallic Glasses XVI
Perturbation Analysis of Amorphous Alloy Formation
Shockwave Consolidation to Create Bulk Metallic Glass
Part XVIII. Ceramic Materials for Nuclear Energy Research and Applications
Characterization of the Irradiation Effects in Nuclear Graphite
Irradiation Effects on Reactor Concrete Structures
Part XIX. Coatings and Surface Engineering for Environmental Protection
Electrochemical Mechanism and Preparation of Cr–Low-Carbon Steel Composite in a NaCl–KCl–NaF–Cr2O3 Molten Salt
Diamond-Like Carbon Coating for Drill Collars: Test Experiences
Inhibition Effect of Essential Oil Extracts on the Corrosion Inhibition of Mild Steel in Chloride–Sulphate Media
Corrosion Properties of Steel Sheet with Zinc-Base Alloy Coatings
Effect of Heat Treatment on the Localized Corrosion Resistance of S32101 Duplex Stainless Steel in Chloride/Sulphate Media
Study of Mechanisms of Cobalt Electrodeposition by Means of Potentiodynamic Polarization Curves
Part XX. Computational Approaches for Big Data, Artificial Intelligence and Uncertainty Quantification in Computational Materials Science
Artificial Intelligent and Simulation Nanostructure of Ceramic
Part XXI. Computational Thermodynamics and Kinetics
Kinetics Calculation and Analysis of AlN Precipitation in ML40Cr Steel Austenite
Study of Dendrite Growth Under Forced Convection in Superalloy Solidification by Multiphase-Field Coupled Lattice Boltzmann Method
Modeling of Volume Diffusion-Controlled Phase Transformations in Multiphase Multicomponent Alloy Systems by Minimization of Gibbs Energy
A New Method for Calculation of Vapor–Liquid Equilibrium (VLE) of Au–Cu Alloy System
Ab Initio Study on the Oxidation Mechanism of Millerite
Kinetic Model of Silica Dissolution in CaO–SiO2–MgO–Al2O3 Slag System
Part XXII. Deformation and Damage Behavior of High Temperature Alloys
Origin of the Significant Impact of Ta on the Creep Resistance of FeCrNi Alloys
Stress Analysis and Structure Optimization of W-Shaped Radiant Tube in Continuous Annealing Furnace
Part XXIII. Effective Business Improvement Methodologies for the Minerals, Metals, and Materials Industries
Case Studies of Continuous Improvement Projects in the Metals Industry
Part XXIV. Environmentally Assisted Cracking: Theory and Practice
Fracture Mechanics-Based Study of Stress Corrosion Cracking of SS304 Dry Storage Canister for Spent Nuclear Fuel
Similar and Dissimilar Metal Weld Failures in Hydrocracking Service at a Refinery
Influence of Tempering Treatment on Precipitation Behavior, Microstructure, Dislocation Density and Hydrogen-Induced Ductility Loss in High-Vanadium Hot-Rolled X80 Pipeline Steel
Part XXV. Fatigue in Materials: Multi-Scale and Multi-Environment Characterizations and Computational Modeling
Initiation and Early Growth of Fatigue Cracks
Part XXVI. Freeze Linings: Myth and Reality
Influence of CaO/SiO2/Al2O3 Ratio on the Melting Behaviour of SynCon Slags
Freeze Lining Refractories in Non-ferrous TSL Smelting Systems
Freeze-Lining Formation in Submerged Arc Furnaces Producing Ferrochrome Alloy in South Africa
Designing Furnace Lining/Cooling Systems to Operate with a Competent Freeze Lining
Part XXVII. General Poster Session
Corrosion Resistance of Hot Dipping Al–Zn–Si and Zn–Al–Mg–Si Alloy Coating
Performance of Low-Cost 3D Printed Pylon in Lower Limb Prosthetic Device
Sequential Leaching Characteristics of Chromium in AOD Slag-Based Cementitious Materials
Study on the Reaction Behavior of Hydrochloric-Acid-Containing Titanium Blast Furnace Slag
Thermodynamic and Kinetic Analysis of Inhomogeneous Distribution of Solute on Precipitations in as Cast Nb–V–Ti Microalloyed Steel
Part XXVIII. Heterogeneous and Gradient Materials (HGM III): Tailoring Mechanical Incompatibility for Superior Properties
Radiation and Corrosion Resistances of 316LN Austenitic Stainless Steel by Rotationally Accelerated Shot Peening
Part XXIX. High Entropy Alloys VII
A Novel Dual-Phase Gradient Material of High-Entropy Alloy Prepared by Spark Plasma Sintering
Molecular Dynamics Simulations on the Mechanical Behavior of AlCoCrCu0.5FeNi High-Entropy Alloy Nanopillars
Production of AlCoCrFeNiME-Based High-Entropy Alloys via Self-Propagating High-Temperature Synthesis
Part XXX. ICME Education in Materials Science and Mechanical Engineering
ICME Applied in the Undergraduate Capstone Senior Design Sequence
Part XXXI. Interfaces in Structural Materials: An MPMD Symposium in Honor of Stephen M. Foiles
Effect of a Vertical Twin Boundary on the Mechanical Property of Bicrystalline Copper Micropillars
Part XXXII. Materials for Molten Salt Energy Systems
Effect of Ni on the Corrosion Behavior of Haynes 230 Alloy in MgCl2-KCl Salt
Part XXXIII. Mechanical Behavior of Nuclear Reactor Components
The Study of Mechanical Behaviour of Materials for the Nuclear Reactor Components in SUSEN Hot Cells
Investigation of Radiation Temperature and Straining Temperature Effects on the Screw Dislocation Mobility Evolution in Irradiated Ferritic Grains Using 3D Dislocation Dynamics
Part XXXIV. Mechanical Behavior Related to Interface Physics III
Mechanical Properties of Amorphous Silicon Nanoparticles
Part XXXV. Modeling and Simulation of Composite Materials
Molecular Dynamics Simulation of the Structure and Transport Properties of xKF–yNaF–zAlF3
Part XXXVI. Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials XVIII
Microstructure Evolution and Physics Properties of Low Silver Copper Alloy Wires During In Situ Composite Preparation
Part XXXVII. Phase Transformations and Microstructural Evolution
Heat Treatment Strategies to Improve the Quasi-Static and Dynamic Performance of Alpha + Beta Titanium Alloys
Effect of Silicon Content on the Dilatometric Behavior of a Medium-Carbon Steel
Phase-Field Simulation of Intermetallic Phase Precipitation in a High-Al Alloyed Lightweight High-Strength Steel
Shape Memory Behavior of Ni49.5Ti50.5 Processing-Induced Strain Glass Alloys
Precipitation Hardening of Supersaturated Al–Sc–Zr Produced via Melt-Spinning
Effect of Sm Content and Solidification Rate on Microstructure of SmFe Alloy
Evolution of Dendritic Morphology Under HPMO Treatment
In Situ Observation of Melting and δ ↔ γ Phase Transformation in Duplex Stainless Steel
Microstructural Evolution of a Transformation in Which There Is an Exclusion Zone Around Each Nucleus
Thermodynamic Properties of Si–B Alloys Determined by Solid-State Heterogeneous Phase Equilibrium
Part XXXVIII. Powder Processing of Bulk Nanostructured Materials
Microstructure Evolution and Mechanical Properties of Medical Material Mg–3Zn Alloy Prepared by Semi-solid Powder Injection Moulding
Inhomogeneity of Strain in Metal Particulates Produced by Modulation-Assisted Machining
Numerical Simulation and Validation of Gas and Molten Metal Flows in Close-Coupled Gas Atomization
Density Separation of Mixed Carbide Colloids via Standing Wave Physics
The Influence of Mechanical Activation on the Synthesis of Ca2MgSi2O7
Part XXXIX. Recent Advances in Functional Materials and 2D/3D Processing for Sensors and Electronic Applications
3D Printing of Polymer-Based Gasochromic, Thermochromic and Piezochromic Sensors
3D Printing of Pharmaceuticals and Transdermal Drug Delivery––An Overview
Formulation of Curable Resins Utilized in Stereolithography
MARS––Magnetic Augmented Rotation System
Part XL. Recent Developments in Biological, Structural and Functional Thin Films and Coatings
Friction Conditions on Deep-Drawing Tool Radii When Using Volatile Media as Lubrication Substitute
Investigation of Friction and Adhesion Behavior of Textured Workpieces and Coated Tools Under Dry Tribological Contact
Effects of Emissivity on Combustion Behavior of Energetic Materials
Self-healing in Materials: An Overview
Part XLI. Solidification Processing of Light Metals and Alloys: An MPMD Symposium in Honor of David StJohn
Revealing the Heterogeneous Nucleation and Growth Behaviour of Grains in Inoculated Aluminium Alloys During Solidification
Influence of Microstructure Evolution During Twin-Roll Casting on the Properties of Magnesium Sheets
A History of the Global Light Metals Alliance
Analysis of the High-Purity Aluminum Purification Process Using Zone-Refining Technique

People also search for TMS 2019 148th Annual Meeting Exhibition Supplemental Proceedings 1st:

tms annual meeting & exhibition 2023
    
tms annual meeting and exhibition
    
tms exhibition
    
tms conference 2013
    
tms 2022 annual meeting & exhibition

Tags: Annual Meeting, Exhibition Supplemental, Proceedings, Metals Materials Society