Advances in Simulation Product Design and Development Proceedings of AIMTDR 2018 1st Edition by Shunmugam, Kanthababu ISBN 9789813294875 9813294876

Part I. Simulation

1. Some Investigations on Drilling of Aluminium Alloy from FEA-Based Simulation Using DEFORM-3D

2. Self-Organizing Migrating Algorithm to Minimize Module Changes at Machine-Level in Reconfigurable Manufacturing

3. Modelling and Simulation of Deep Drawing Process of Circular Cup on AL1200 Using Finite Element Analysis

4. Numerical Investigation on Single Point Incremental Forming (SPIF) of Tailor Welded Blanks (TWBs)

5. Force and Thermal Variational Analysis by FE Approach on Dry Turning of Inconel 718

6. Experimental Investigation and Finite Element Modelling of Electrical Discharge Machining Using Hollow Electrodes and Injection Flushing

7. Experimental and Numerical Characterization of Residual Stresses in Tailor Welded Blanks After Springback

8. Prediction of Cutting Forces in Micro-milling of P-20 Steel by TiAlN-Coated WC Tool: An Analytical Approach

9. Effect of Mechanical Constraints on Thermo-Mechanical Behaviour of Laser-Welded Dissimilar Joints

10. Thermal Modeling and Simulation of Crater Generation on Wire Electrode During Wire EDM Operation

11. Optimal Vendor-Managed Inventory Models for Single-Vendor Multiple-Retailer Supply Chains

12. Simulation of Torsional–Axial Chatter Vibrations in Indexable Drilling for Noise Generated

13. Finite Element Analysis of Sheet Thickness and Force Variation in AA6063 During Single Point Incremental Forming

14. Analysis and Prediction of Electrical Discharge Coating Using Artificial Neural Network (ANN)

15. Machining Performance Prediction for Zirconia Toughened Alumina Insert in Machining of High Carbon Steel Using Computational Approach

16. FEM Approach to Predict Three Jaw Chuck Stiffness and Its Effect on Gripping Force for High Speed Turning and Experimental Verification

17. Experimental Investigation and Numerical Analysis of Thermal Fields and Residual Stresses in Multi-pass GTA Welding of AA 6061T6 Plates

18. Effect of Johnson–Cook Material Model Constants on Predicted Chip Morphology and Forces in FE Simulations of Machining Operation for 93% WHA Alloy

19. Numerical Simulation of Heat Transfer and Fluid Flow in Co-axial Laser Cladding of Ti6Al4V Alloys

20. FEA of Electrical Discharge Machining on the Particle Metal Matrix Composite

21. Development and Analysis of a Discrete Particle Swarm Optimisation for Bi-criteria Scheduling of a Flow Shop with Sequence-Dependent Setup Time

22. A MATLAB-Based Application to Solve Vehicle Routing Problem Using GA

23. On Modeling the Thermal Behavior of Single and Quad Laser Melting of Powdered Nickel Alloy

24. Numerical Analysis of Cutting Modes in High-Speed Machining of Aluminum Alloys with PCD and CBN Tool Inserts

25. Design of Row-based Machine Layout—A Case Study

26. Optimization of Tool and Process Parameter for Injection Molded Component

27. Flow Path Optimization of Pneumatic Valves Through CFD Analysis

28. Virtual Simulation with Statistical Approach on Performance Optimization

29. Design, Development, and Modeling of EMLA-Based Wheel Brake Actuation System for an UAV

30. Design, Fabrication and Simulation of Micro-EDM Machined AISI 316 SS Micro-channel Heat Sink

31. Geometrical Modeling and Performance Analysis of Textile Composites Using Python Scripted Software Platforms

32. Electromagnetic Transient-Thermal Modeling of High-Frequency Induction Welding of Mild Steel Plates

33. Prediction of Machining Responses in Wire EDM on Stainless Steel-316

34. Knowledge Discovery by Decision Tree Using Experimental Data in High-Speed Turning of Steel with Ceramic Tool Insert

35. Decision-Making System for Accepting/Rejecting an Order in MTO Environment

36. Numerical Simulation of Channel Angles and Their Combination Influence on Plastic Deformation Behaviour of Pure Al Processed by Equal Channel Angular Pressing

37. Teeth Wear Enhancement Along the Tooth Profile of Spur Gear Drive by Balancing the Fillet Stress Through Positive Correction Factor

38. A Coupled Thermal-Structural Model for Welding of Aluminium Alloy Sheets

39. Numerical Modelling and Simulation of Single and Multi-spark Impacts in Electrical Discharge Machining

40. Finite Element Simulation and Experimental Investigations to Predict Tool Flank Wear Rate During Microturning of Ti–6Al–4V Alloy

41. Analysis of a Few Heuristics Proposed Based on Slope Indices to Solve Simple Type—I Assembly-Line Balancing Problems

42. A Thermo-Mechanical Finite-Element Analysis of Resistance Spot Welding of Dual-Phase Steel and Austenitic Stainless Steel

43. The Effect of Process Parameters on Pulsed Through Transmission Laser Welding of Acrylic and Polycarbonate Sheets

Part II. Product Design and Development

44. Design and Development of Combination Tool for Drilling and Tapping Operation on PVC

45. Processing and Characterization of a High Entropy Alloy in Application to Golf Club Head

46. Design and Development of Improved Ball End Magnetorheological Finishing Tool with Efficacious Cooling System

47. Analyzing Enablers of Emission Reduction Strategies of Cement-manufacturing Industry of India under Fuzzy Environment

48. Role of Product Development Process for NPD Success in Indian Manufacturing Industries: Quality, Cost and Technological Aspects

49. Design of Open Battery Pack Interface for Electric Vehicle Personalization

50. Enhancement of Static and Dynamic Characteristics on Micro-lathe Bed by the Use of Alternate Form Design and Composite Materials

51. Development of Indigenous Direct Drive Rotary Guide Bush Device and Establishment of Three-Spindle Synchronization for Sliding Headstock Automat

52. Development of 3-Axis Micro-Step Resolution Desktop CNC Stage for Machining of Meso- and Microscale-Features

53. Design and Development of a Pump-Driven Variable Buoyancy Engine (VBE) for Autonomous Underwater Vehicles/Gliders

54. Application of Value Analysis and Value Engineering for Cost Reduction of Global Pumping Unit

55. Development of Prototype Variable Geometry In-Pipe Robot for Reconfigurable Applications

56. Six Sigma in Battery Assembly of Skid-Steer Loader

57. Concept Design and Development of Position Sensor in Door Control System

58. Remote Monitoring of Axle Loads for Heavy Commercial Vehicles

59. Influence of TMTM as the Secondary Accelerator on Blooming Resistance of NBR-PVC Blends

60. Rapid Product Development from an Existing Product Using Reverse Engineering Method

61. Productivity Improvement by Reduction of Cycle Time Through Implementing Clustering: A Case Study

62. Experimental Investigation of Core Shear Properties and Facing Sheet Fracture Stress of Spherical Sandwich Structure

63. Design Analysis of Brass Cartridge Case for Water Disruptor Application

64. Design and Analysis of Hydraulic Fixture for WABCO Body Housing

65. Development of Alignment Fixture for Precision Assembly of Aerospace Control Surfaces Incorporating Process and Assembly Variations

66. Product Design Development and Structural Stress Analysis of Chain Cutting and Riveting Tool for Automotive Vehicle Application

67. Design and Development of Cartridge-Based Automated Fluid Delivery System for Ball End Magnetorheological Finishing Process

68. ARM Controller Based Smart Loom for Generating Basic Weaves

69. Manufacturing of Autoclaved Aerated Concrete (AAC): Present Status and Future Trends

70. Influence of Flow Domain Parameters on Hot Water Actuation of Shape-Memory Alloy Spring for Barrier Gate System

71. A New Approach to Control the Position of Joint Arm Robot Using Image Background Subtraction Technique