Design and Modeling of Mechanical Systems III Proceedings of the 7th Conference on Design and Modeling of Mechanical Systems CMSM 2017 March 27 29 Hammamet Tunisia 1st Edition by Mohamed Haddar, Fakher Chaari, Abdelmajid Benamara, Mnaouar Chouchane, Chafik Karra, Nizar Aifaoui 3319666967 9783319666969

Design and Modeling of Mechanical Systems III Proceedings of the 7th Conference on Design and Modeling of Mechanical Systems CMSM 2017 March 27 29 Hammamet Tunisia 1st Edition by Mohamed Haddar, Fakher Chaari, Abdelmajid Benamara, Mnaouar Chouchane, Chafik Karra, Nizar Aifaoui – Ebook PDF Instant Download/Delivery: 3319666967, 9783319666969

Full download Design and Modeling of Mechanical Systems III Proceedings of the 7th Conference on Design and Modeling of Mechanical Systems CMSM 2017 March 27 29 Hammamet Tunisia 1st Edition after payment 

Product details:

ISBN 10: 3319666967

ISBN 13: 9783319666969

Author: Mohamed Haddar, Fakher Chaari, Abdelmajid Benamara, Mnaouar Chouchane, Chafik Karra, Nizar Aifaoui

This book offers a collection of original peer-reviewed contributions presented at the 7th International Congress on Design and Modeling of Mechanical Systems (CMSM’2017), held in Hammamet, Tunisia, from the 27th to the 29th of March 2017. It reports on both research findings, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, this proceedings  offers a broad overview on the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2017 was jointly organized by two leading Tunisian research laboratories: the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax and the Mechanical Engineering Laboratory of the National Engineering School of Monastir..

Table of contents:

1. Enhancing Efficiency of InGaN Nanowire Solar Cells by Applying Stress

2. Injection Fault Detection of a Diesel Engine by Vibration Analysis

3. A Nonlinear Analysis of a Flexible Unbalanced Cracked Rotor-Bearing System

4. Optimized Nonlinear MDOF Vibration Energy Harvester Based on Electromagnetic Coupling

5. Sub-hourly Validation of the Direct Normal Solar Irradiance Clear Sky Models

6. Microstructure and Mechanical Properties of Friction Stir Welded AA2024-T3 Joints

7. On the Elementary Wear Mechanisms of UD-GFRP Composites Using Single Indenter Scratch Test

8. Multiobjective Assembly Line Resource Assignment and Balancing Problem of Type 2

9. Dynamic Vibration of Vertical Axis Wind Turbine Geared Transmission System

10. Free Vibration of a Multi-span Road Bridge Supported by Point Elastic Supports

11. Modelization and Multimodel Control of Ship Electric Propulsion System

12. Strategy of Image Capture and Its Impact on Correspondence Error in Reconstructed 3D-Images-Based Point

13. Analytical and Numerical Approach for the Dynamic Behavior of a Beam Under a Moving Load

14. CFD Modeling of Wastewater Discharges in a Sewer System

15. Surrogate-Based Multidisciplinary Design Optimization for Stiffened Panels Application

16. Friction Compensation in a 2DOF Robot Manipulator

17. Anisotropic Elastic–Viscoplastic Modelling of a Quasi-unidirectional Flax Fibre-Reinforced Epoxy Subjected to Low-Velocity Impact

18. Dynamic Simulation of a Partial Unloaded Walking Within the Cable Driven Legs Trainer Using MATLAB SimMechanics

19. Hysteresis Identification Models: A Review

20. Static Behavior of Carbon Nanotubes Reinforced Functionally Graded Nanocomposite Cylindrical Panels

21. A Four-Node Shell Element for Geometrically Nonlinear Analysis of Thin FGM Plates and Shells

22. Post-buckling of FSDT of Functionally Graded Material Shell Structures

23. A New Cumulative Fatigue Damage Model for Short Glass Fiber-Reinforced Polyamide 66

24. Independent Loops Selection in a Hydraulic Looped Network

25. Canonical Variable Analysis for Fault Detection, System Identification and Performance Estimation

26. Effects of Using Flexible Die Instead of Flexible Punch in Rubber Pad Forming Process

27. On the Use of NC Milling and Turning Machines in SPIF Process of Asymmetric Parts: Numerical Investigation

28. Application of the Independent Component Analysis in the Estimation of the Road Disturbance Applied on a Nonlinear Suspension System

29. Contribution to the Evaluation of Uncertainties of Measurement to the Data Processing Sequence of a CMM

30. Integrated AHP-TOPSIS Approach for Pareto Optimal Solution Selection in Multi-site Supply Chain Planning

31. Reciprocating Compressor Prognostics

32. Dynamic Analysis of Bevel Gear in Presence of Local Damage in NonStationary Operating Conditions

33. Post-buckling Analysis of Functionally Graded Materials Structures with Enhanced Solid-Shell Elements

34. Reliability Analysis of Random Aerodynamic Torque of Horizontal Axis Wind Turbine

35. Topological Modeling of 2D Piezoelectric Truss Structure Using the MGS Language

36. Developing Mathematical Models of Stress Concentration Factor Using Response Surface Method

37. Porous Shape Memory Alloy: 3D Reconstitution and Numerical Simulation of Superelastic Behavior

38. Flexural Fatigue of Bio-Based Composites

39. Mode I Fracture Energy of One-Component Polyurethane Adhesive Joints as Function of Bond Thickness for the Automotive Industry

40. Scratch Resistance and Wear Energy Analysis of TiO2 Coatings on 316L Stainless Steel

41. Analysis of Double Reducer Stage Using Substructuring Method

42. Numerical Study of Water Waves Impact on Offshore Structure

43. Comparative Investigation of Turbulence Modeling in Counterflowing Jet Predictions

44. Structural Sources Localization in 2D Plate Using an Energetic Approach

45. A CAD Assembly Management Model: Mates Reconciliation and Change Propagation

46. Mechanical Performance of Doum Palm Fiber-Reinforced Plater Mortars

47. Experimental and Analytical Analysis of Particle Damping

48. Seeded Planetary Bearing Fault in a Helicopter Gearbox—A Case Study

49. Study of the Anti-fingerprint Function: Effect of Some Texture Properties on the Finger Contact Area

50. Online Identification of Road Profile Variation Using a Constant Piecewise Function

51. Cathodic Protection System by Imposed Current for a Vedette

52. Vibration Analysis of a Nonlinear Drivetrain System in the Presence of Acyclism

53. Calibration and Correction of the Beam Solar Radiation Models Using High Temporal Resolution Measurements

54. Collapse Analysis of Longitudinally Cracked HDPE Pipes

55. Cutting Modeling of Ti6Al4V Alloy When Using a TiAlN-Coated Insert

56. Turbulent-Heated Plane Compressible Jet Emerging in a Directed Co-Flowing Stream

57. Effects of Starting Time and Impeller Geometry on the Hydraulic Performance of a Centrifugal Pump

58. Effect of the Volute Diffuser Shape on Pressure Pulsations and Radial Force in Centrifugal Pumps

59. Multi-criteria Decision-Making Approaches for Facility Layout (FL) Evaluation and Selection: A Survey

60. Effect of the Radial Flow and Average Molecular Weight on the Surface Defect in PDMS Extrusion

61. DSC Investigation on Entropy and Enthalpy Changes in Ni-Rich NiTi Shape Memory Alloy at Various Cooling/Heating Rates

62. On the NiTi SMA Thermal Behavior at Various Heat Treatment Conditions

63. Multiobjective Constrained Optimization of Sewing Machine Mechatronic Performances

64. Numerical Study of a Gas Jet Impinging on a Liquid Surface

65. Modeling and Simulation of Transients in Natural Gas Pipelines

66. Damage Analysis of Flax Fibre/Elium Composite Under Static and Fatigue Testing

67. Measurement of Thermal Contact Resistance Across Cylinder Head Gasket

68. Ultra-Thin Films Effects on the Dynamic Behaviour of Three-Layer Laminated Plate

69. Assembly Sequence Generation Based on the CAD Model Simplification

70. In-Plane Strength Domain Numerical Determination of Hollow Concrete Block Masonry

71. Definition and Classification of Collaborative Network: MCDM Approaches for Partner Selection Problem

72. Supply Chain Risk Management, Conceptual Framework

73. Numerical Analysis of a Segmented Wind Turbine Blade Using the Substructure Method

74. Proposition of Eco-Feature: A New CAD/PLM Data Model for an LCA Tool

75. Effects of Pretextured Surface Topography on Friction and Wear of AA5083/AISI52100 Materials’ Pair

76. Solidworks—Matlab Coupling for Disassembly Plan Generation in a CAE Environment

77. Numerical Study of Wall Horizontal Turbulent Jet of Freshwater in a Homogeneous Co-flow Stream of Saltwater

78. Collaborative Inventory Management in Tunisian Healthcare Sector

79. On the Role of Activation Volume Parameter in Heterogeneous Deformation of Zr-Based Metallic Glasses

80. Inhomogeneous Wave Correlation for Propagation Parameters Identification in Presence of Uncertainties

81. Experimental and Numerical Study on Force Reduction in SPIF by Using Response Surface

82. Identification of Control Chart Deviations and Their Assignable Causes Using Artificial Neural Networks

83. Optimization of Machining Process During Turning of X210Cr12 Steel Under MQL Cooling as a Key Factor in Clean Production

84. High Strain-Rate Tensile Behaviour of Aluminium A6063

85. Pump Failure: Effect of Wall Elasticity on Pressure Fluctuations

86. Numerical Modeling of Hot Incremental Forming Process for Biomedical Application

87. A Polynomial Chaos Method for the Analysis of the Dynamic Response of a Gear Friction System

88. Sensitivity Analysis of Backlogging Cost in Multi-item Capacitated Lot-Sizing Problem

89. Effect of the Radial Flow on the Volume Defect in Polydimethylsiloxane Extrusion Using PIV the Technique

90. Tribological Behavior of HDPE Against Stainless Steel on the Presence of Bio-Lubricants

91. Collective Dynamics of Disordered Two Coupled Nonlinear Pendulums

92. Experimental Investigation on the Influence of Relative Density on the Compressive Behaviour of Metal Mesh Isolator

93. Anisotropic Study of Behavior of Titanium Alloy Thin Sheets Using Identification Strategy

94. Biomechanical Approach for the Development and Simulation of a Musculoskeletal Model of the Ankle

95. Cooling of Circuit Boards Using Natural Convection

96. Effect of Gravity of Carrier on the Dynamic Behavior of Planetary Gears

97. Prediction of the Position Error of the Uncertain 3-UPU TPM Using Interval Analysis

98. Influence of Stress Concentration Factor on the Evolution of the Strain Energy Release Rate at High Temperature in Highly Ductile Carbon Fibers Reinforced Thermoplastic Structures

99. Experimental and Numerical Study of Single Point Incremental Forming for a Spiral Toolpath Strategy

100. A Disassembly Sequence Planning Approach Based on Particle Swarm Optimization

101. HDPE Pipe Failure Analysis Under Overpressure in Presence of Defect

102. Plastic Behavior of 2024-T3 Under Uniaxial Shear Tests

103. Optimal Work-in-Process Control for a Closed Multistage Production System with Machine Preference

104. Brittle Fracture: Experimental and Numerical Modeling Using Phase-Field Approach

105. Mathematical Modeling of Surface Roughness in Electrical Discharge Machining Process Using Taguchi Method

106. Application of Set-based-approach for the Global Sizing of an Active Macpherson Suspension System

107. Vibration Suppression of a Cantilever Plate During Milling Using Passive Dynamic Absorber

108. Optimized Method for Computing Phase-Field Model Using Decoupling Scheme

109. Numerical Study of PCM Solidification in a Rectangular Modular Heat Exchanger

110. Study of Surface Displacements Using DIC Technique

111. Use of Gabor Transform for Damage Detection of Ball Bearing Raceway Defects

112. Shape, Size, and Distribution Effects on Thermal Conductivity of Two-Dimensional Nano-Composite System

113. Effect of Tempering Temperature on Microstructure and Mechanical Properties of Steels

114. Accuracy Improvement of CMM by Compensation of Probe Contact Point Deviations

115. Investigation of a Cooling Process in a Rectangular Cavity

116. Improvement of Heat Transfer in a Rectangular Cavity Using Solar Collector

117. Sub-modeling Analysis of the Thermal Behavior of a Lead-Acid Battery

118. Energy Management of Hybrid Electric Vehicle Using PSO Algorithm

119. Fatigue Crack Propagation and Life Prediction of Welded Structures

120. Modeling of Dynamic Behavior of the CFRP with Delamination Damage Using Finite Element Method

121. Predictive Maintenance of Railway Track Based on Vibration Signal Analysis

122. Analysis and Simulation of a Planar Parallel Robot

123. Unsteady Flow and Heat Transfer Analysis in a Microchannel Heat Sink with Zigzag Grooves

124. Numerical and Experimental Study of Dynamic Behavior of Micro-electro-mechanical System Accelerometer

125. Modelling of Steel Strip Shape Defect Based on Gaussian Process Regression

126. Strength Prediction of Composite Reinforced Concrete Beam Using Neural Networks

127. Experimental and Numerical Investigation of Drilling Induced Delamination in CFRP Laminates

128. Investigation of Influence of Fatigue Life of Vehicle Suspension Systems

129. Effect of Superelasticity on Mechanical Behavior of NiTi Shape Memory Alloy Thin Films

130. Finite Element Analysis of Reinforced Concrete Beams Strengthened with CFRP

131. On the Thermal Conductivity of Functionally Graded Materials

132. Fault Detection and Isolation in a Hydraulic System Using Decoupling Method

133. Experimental and Numerical Study on Thermal-Mechanical Behavior of NiTi Shape Memory Alloys

134. Analysis of Fault Propagation in Rolling Element Bearings

135. Influence of Temperature on Vibration of Rotor-Bearing Systems with Cracks

136. Model for Dynamic Analysis of Inhomogeneous and Orthotropic Shells

137. Fault Diagnosis of Rolling Element Bearings Based on Pattern Recognition and Machine Learning

138. Influence of Manufacturing Process Parameters on Microstructure and Mechanical Properties of Metal Matrix Composites

139. Parametric Study on the Influence of Pore Size on Mechanical Properties of Porous Materials

140. Numerical and Experimental Study of Thermal Stresses in Thin Films

141. Influence of Machining Parameters on Surface Roughness and Tool Wear in Turning of Aluminum Alloys

142. Study of Heat Transfer Enhancement by Using Nanofluids in Microchannels

143. Structural Health Monitoring Using Fiber Optic Sensors

144. Dynamic Modeling of Gearbox Considering Tooth Surface Defects

145. Experimental Investigation of Fatigue Life of Welded Joints in Steel Structures

146. Optimization of Control Parameters for Active Vibration Control of Smart Structures

147. Numerical Simulation of Heat Transfer in Porous Media

148. Study on the Effect of Heat Treatment on Mechanical Properties of Titanium Alloys

149. Investigation of Wear Mechanisms in Composite Materials

150. Experimental and Numerical Analysis of Structural Response Under Impact Loading

People also search:

what is mechanical system design

modeling mechanical systems examples

dynamic modeling of mechanical systems

modeling mechanical systems

mechanical design and systems handbook

Tags: Mohamed Haddar, Fakher Chaari, Abdelmajid Benamara, Design