Emerging Developments in the Power and Energy Industry Proceedings of the 11th Asia Pacific Power and Energy Engineering Conference APPEEC 2019 April 19 21 2019 Xiamen China 1st Edition Rodolfo 1000617432 9781000617436

This completed downloadable of Emerging Developments in the Power and Energy Industry Proceedings of the 11th Asia Pacific Power and Energy Engineering Conference APPEEC 2019 April 19 21 2019 Xiamen China 1st Edition Rodolfo Dufo-López

Instant downloaded Emerging Developments in the Power and Energy Industry Proceedings of the 11th Asia Pacific Power and Energy Engineering Conference APPEEC 2019 April 19 21 2019 Xiamen China 1st Edition Rodolfo Dufo-López pdf docx epub after payment.

Product details:

• ISBN-10 ‏ : ‎ 1000617432
• ISBN-13 ‏ : ‎ 9781000617436
• Author: Rodolfo Dufo-López

Power and Energy Engineering are important and pressing topics globally, covering issues such as shifting paradigms of energy generation and consumption, intelligent grids, green energy and environmental protection. The 11th Asia-Pacific Power and Energy Engineering Conference (APPEEC 2019) was held in Xiamen, China from April 19 to 21, 2019. APPEEC has been an annual conference since 2009 and has been successfully held in Wuhan (2009 & 2011), Chengdu (2010 & 2017), Shanghai (2012 & 2014), Beijing (2013 & 2015), Suzhou (2016) and Guilin (2018), China. The objective of APPEEC 2019 was to provide scientific and professional interactions for the advancement of the fields of power and energy engineering. APPEEC 2019 facilitated the exchange of insights and innovations between industry and academia. A group of excellent speakers have delivered keynote speeches on emerging technologies in the field of power and energy engineering. Attendees were given the opportunity to give oral and poster presentations and to interface with invited experts.

Table of contents:

1. A safety analysis strategy for transmission lines considering power system oscillation
2. Neutral point potential balance strategy for NPC three-level inverter based on FOC-ADRC
3. Probabilistic power flow calculation of power system considering DGs based on improved LHS
4. A new sensorless vector control method for PMSM based on adaptive fuzzy sliding mode observer and Ka
5. A novel soft-switching bidirectional DC-DC converter based on LLC resonance
6. The deadbeat current control of MMC rectifier with wide range output voltage
7. Control of active magnetic bearing system in accordance with state feedback theory
8. Impact of large-scale electric vehicle charging on a power grid and its optimal scheduling strategy
9. Research on active response control strategy of smart building micro-grid with energy storage system
10. Innovative floating support technologies for submarine cable landing
11. Fault detection and diagnosis of analog circuits based on LOGFA algorithm optimized ELM
12. Research on compensation strategy of UPQC based on super capacitor
13. Stability performance of an innovative submarine cable laying vessel during cable landing
14. Evaluation on performance of HESS-based grid-connected photovoltaic power system
15. Direct torque control of permanent magnet synchronous motor based on torque compensation and referen
16. A novel railway power conditioner based on modular multilevel converter with integrated super capaci
17. Investment and financing problems of the energy internet and suggestions
18. Research on a flexible AC/DC microgrid based on a power-coordinated control strategy
19. Fluid-structure interaction and performance analysis of an ocean current turbine
20. Research and analysis on the relationship between floating electrode discharge signal and ground cur
21. A coordinated damping control for ultralow-frequency oscillation in a DC isolated system
22. A method for testing the sensitivity of equipment to voltage sag
23. PIT analysis of typical industrial production processes under voltage sag
24. Calculation of formation pressure during drilling and shut-in of oilfields with multiwell and multil
25. Multi-index program decision model for the development of a condensate gas reservoir group and its a
26. An analytical method for voltage sag profile estimation of a power system with STATCOMs
27. Evaluation of development effects of SZ36-1 oilfield after overall infilling
28. Cyberphysical paradigm of multiagent systems for smart microgrids
29. Analysis of the error of harmonic current detection based on the instantaneous reactive power theory
30. Method for evaluating the validity of synchronous generator model parameters considering disturbance
31. Method for judging the severity of atmospheric corrosion of power equipment metal based on colorimet
32. Safety analysis of entering equipotential on UHV transmission lines
33. Application of single-phase three-leg inverter for grid connected transformerless photovoltaic syste
34. Sustainable development in green energies and the environment
35. Study on radiated electromagnetic disturbance characteristics of a ±800 kV VSC-HVDC converter valve
36. Research on multi-resource co-control method and defense system for bundled wind-thermal power trans
37. An improved phase current reconstruction strategy for brushless DC motors with single current sensor
38. Operation optimization of an integrated energy system considering multiple redundant energy flow pat
39. Analysis of diesel engine pipeline vibration in a nuclear power plant
40. Integrated energy planning and technology application for an industrial park
41. Study on treatment of hydro turbine torque characteristic curve based on load shedding test
42. Analysis of energy price distortion based on time-varying elastic production function
43. Calculation and experiment of short-circuit fusing characteristics of copper and copper-clad aluminu
44. Kinetic battery model application for capacity optimization of the wind/solar/battery stand-alone hy
45. Optimal method for day-head dispatching of a multi-energy micro-grid
46. Research on integrated management system of power grid information of provincial and county based on
47. Piecewise analytical expressions for electromagnetic field distribution within an apertured shieldin
48. Analytical study of electromagnetic shielding characteristics of a wire mesh
49. Protection scheme for flexible DC distribution grids based on a full-bridge modular multilevel condu
50. Measurement and analysis of the electromagnetic disturbance caused by the switching operation of dis
51. An evaluating method of cloud matter–element theory and its application for developmental form of
52. Wind farm layout optimization for minimum levelized cost of energy considering land lease cost, nois
53. Investigation of the hydraulic forces on the radial vibration of hydro-turbine units
54. A new protection principle of MMC-HVDC transimission lines with voltage polarity on both sides of th
55. Investigations of potential difference characteristics between two points on a grounding grid of a p
56. FEM analysis of iron core temperature distribution in a magnetically controlled shunt reactor with d
57. An effective health index calculation of 10 kV distribution transformer using fuzzy set theory and n
58. A two-settlement contract with risky power trading to reduce generation uncertainty and increase gen
59. Study on the characteristics of low voltage ride through for DFIG based on vector control and direct
60. Research on electromagnetic disturbance and suppression measures at the secondary side of the voltag
61. Classification and identification of temperature status of gas insulated switch gear isolation switc
62. Reliability analysis of distribution network considering wind and photovoltaic power
63. Prediction of dissolved gas concentration in power transformer oil based on the multivariate ReLu de
64. Feasibility study on reducing the grounding resistance of a transmission tower with conductive concr
65. Thermoeconomic analysis and multiobjective optimization of a closed isobaric–compressed air energy
66. Experimental study and simulation of CO2 membrane separation of coal-fired flue gas
67. Design of the electric power emergency repair system and its software architecture
68. Experimental investigation and mechanism analysis of NOx reduction by CH4 in the absence of oxygen
69. An identification method of weak links of overhead lines in distribution network based on typhoon sc
70. Research on the VIENNA rectifier based on backstepping control
71. Research on subsynchronous oscillation modal identification based on the FastICA–ARMA algorithm
72. Experimental and modeling investigations on impacts of deeply air staging in a 130 t/h tangentially
73. Wind power ramp forecasting based on deep metric learning
74. Research on the elements and model of the competitive electricity retail market
75. A tie-line power smoothing method for an office building Microgrid by scheduling thermal mass of the
76. A fault current calculation method in a neutral point ungrounded system for a single-phase ground fa
77. Compilation and calculation of prosperity index of power grid investment
78. Research on overseas investment value strategy of power grid project based on social network
79. Study on the influence of length on frequency response characteristics of grounding pole based on CD
80. A method of single-phase ground fault line selection for distribution network based on correlation c
81. Study of the modeling method of wind power time series based on correlation
82. Research on the post-evaluation of power transmission project based on GIOWA operator
83. Study on the effect of transition resistance on the frequency spectrum characteristics of rail imped
84. Study on the influence of AC/DC power supply on the stray current of the subway tunnel
85. Research on transient voltage instability causes and counter-measures of multi-infeed HVDC receiving
86. Estimation of shielding effectiveness of the lossy infinite plane with periodic circular apertures
87. An energy hub based planning method for a combined heat and power based microgrid
88. A scheduling method using a water pump and reservoir for renewable energy power accommodation
89. Graphical and unified analysis of the unsymmetrical shunt faults
90. Newton-Raphson discrete equivalent circuit models for the diode and their application to the photovo
91. A multi-time scale optimization scheduling strategy of virtual power plant with responsive loads
92. Simulation and analysis of the near-field magnetic shielding effectiveness of shielding box with ape
93. Study on corrosion fault diagnosis for grounding grid based on the law of conservation of power
94. A planning approach of distributed generation and energy storage based on an improved parallel P-sys
95. Research on three-phase unbalanced governance strategy of the microgrid based on improved PQ control
96. Study on shielding effectiveness characteristics of infinite metal sheet
97. Medium voltage DC switchboard failure mode and test method analysis
98. Research on differential transformation schemes of substation secondary equipment based on improved
99. Application of high precision lightning location system in distribution network and influence of top
100. Non-linear parameter optimization of power system stabilizers in interconnected multi-machine power
101. Study of energy generation through biogas from landfill waste
102. Comparing the wind and solar power uncertainty in virtual power plants using IGDT method
103. Evaluation bioethanol production from fusant of S. cerevisiae and P. stipitis
104. Methodology of analysis, modeling and supervision of SCADA systems in thermal power plants
105. Energy harvesting from the railroad bed: Choice of the optimum frequencies
106. Improved DFIG control with decoupled control to enhance LVRT response
107. Smart energy measurement using Ethernet
108. A novel low power BIST-TPG with reduced testing time
109. Straightforward derivation of the wye-delta transformations based solely

People also search:

an emerging world power

an emerging world power quizlet

an emerging world power section 3 quiz

an emerging world power test a answer key

an emerging world power section 2 quiz