Proceedings of the 8th International Conference on Fracture Fatigue and Wear FFW 2020 August 26 27 2020 Magd Abdel Wahab

Fracture

The Folded Wiener Process for Non-negative Non-monotone Degradation Processes

Crowd Management for Power Generation: A Critical Analysis on the Existing Materials and Methods. (Structural Modal Analysis)

Damage Evaluation of Free-Free Beam Based on Vibration Testing

A Comparative Study on Indentation and Flattening Contacts

Impact of Abrasive Blasting Media on the Strength of Steel Sheets Adhesively Bonded Joints

Determination of the Effective Stiffness of Half-Open Cross-Section Bars and Orthotropic Steel Deck of a Truss Bridge Using Model Updating

A Study On Optimal Design of Longitudinal Shape For Improving Small-Overlap Performance

Investigation of Flow Forming Process and Heat Treatment Effects on 2024 Aluminium Tubes

Application of Improved Artificial Neural Network to Stiffness Reduction Analysis of Truss Joints in a Railway Bridge

Flow Forming Process for Annealed AISI 5140 Alloy Steel Tubes

Hydrogen Degradation Effects on Crack Propagation in High-Strength Steels: A Fully Coupled Approach

Sensitivity of Damping for Diagnostics of Damage in Structure

Effect of Cross-Over Fraction on Objective Function Value in Genetic Algorithm Optimization of Machining Parameters in Diamond Turning of Aluminum Alloy (RSA-431) for Optical Applications

A Heat Transfer Finite Element Model for Wire-Arc-Additive-Manufacturing Process

Failure Analysis of a Fuel Control Tube from an Aircraft Engine

Detection of Damage in RC Beams Strengthened with NSM CFRP Rectangular Rod by Finite Element Modeling

Particle Swarm Optimisation-Based Support Vector Regression Model to Estimate the Powder Factor of Explosives in Groundwater Tunnel Driving

Study of Pre-strain Effect on Bendability in Three-Point Bending Test

Fracture Mechanics Performance of Through-Thickness Crack of Polymeric 3D Printed Components

D-Beam Theory for Functionally Graded Double Cantilever Beam Analysis

Numerical Treatment of Fractional Differential Models

Mode Shape Based Approach to Identify the Location of Crack and the Influence of Crack on Critical Speed of Gas Turbine Disc

Time-Delay Fractional Optimal Control Problems: A Survey Based on Methodology

Failure Analysis of Strip Foundation on Layered Soil Under Static Loading

Evaluation of the Residual Stress Behavior of 316L Stainless Steel in Electric Generator Blades Subjected to Different Hours of Service

Influence of Microcracks on Strength of Diamond Wire Sawn Silicon Substrates

Residual Stress Behavior on Welding Joints in Different Steels Using X-Ray Diffraction

Effect of Specimen Size on Localization using Digital Image Correlation

Fatigue

Prognosis of Damage Intensity on Reinforced Concrete Beam Under Cyclic Loading

An Experimental Investigation into the Fatigue Behavior of Spot Welded Tensile Shear (TS) Specimens

A Fatigue–Reliability Analysis of Spot Welded Modified Tensile Shear (MTS) Specimens

A Comparative Study on Fatigue Life Prediction of Spot Welded Coach Peel (CP) and Modified Coach Peel (MCP) Type Test Specimens

Numerical Methodology to Predict Subsurface Crack Initiation from Non-metallic Inclusions Due to Rolling Contact Fatigue

Fatigue of Multiaxially Loaded Shaft-Hub Connection Under Different Load Parameters

Evaluation of Fatigue Strength Characteristics of Al–Mg Oxide Dispersed Aluminum Composite

Assessment of a Thermal Fatigue Test Conducted Under Cyclic Non-proportional Loading Using Open Source CAE and Finite Element Analysis Methods

Depreciation Accounting in Longevity Evaluation of Complicated Systems

Fatigue Assessment of Aged Steel Specimens Under Uniaxial Cyclic Loading

Estimation of Steam Turbine Shafts Fatigue Damage Caused by Torsional Vibrations

Crystal Orientation Effect on the Fretting Fatigue Behavior in Ni-Based Single Crystal Superalloys

Three-Dimensional Numerical Analysis of Shrink-Fitted Shafts Under Rotating Bending Fretting Fatigue Condition

Wear

A Model for Prediction and Optimization of Flank Wear in End Milling of AISI 316 Stainless Steel

Study of Sliding Wear in Rail and Wheel Steels: Effect of Hardness Ratio and Normal Load in Pin on Disc Test

Friction Films and Their Influence on the Antifriction Properties of New High-Temperature Nickel Composites

Proposal for New Hardness Concept Using Herbert Hardness Tester

Microstructure and Abrasive Wear of Particle-Filled Composites

Experimental Characterization of Vibration on Gearing Mechanism Using Taguchi Approach

Fretting Wear Effect on Fretting Fatigue by Findley Parameter in Mixed Slip Regime

Effects of Ti-6Al-4 V Surface Condition on the Performance of DFL Lifetimes

Predicting Rebound of Ellipsoidal Granules Using SPH

Micro-Abrasive Wear Behavior Study of an Intermetallic Material—Fe–30Al–6Cr (at.%) Under Conditions of Room and Moderate Temperatures: A Comparison

Acoustic Wear Monitoring During the Milling of Tool Steel for Machining 4.0

Study of Wear on AISI E52100 Steel Using a Lithium Complex Grease and a Calcium Sulfonate Grease

Surface Roughness and Normal Force Effects on the Sliding and Rolling Behavior of POM-H Rolls

Numerical Analysis of the Wind Turbine Pitch Bearing Raceway Tribo-contact due to Cyclic Loading Under Constant Pitch Angle