Product Lifecycle Management Enabling Smart X 1st edition by Felix Nyffenegger, Jose Rios, Louis Rivest, Abdelaziz Bouras ISBN 303062806X 9783030628062

Smart Manufacturing & Factory Technologies

1. Distributed Scheduling in Cellular Assembly for Mass Customization

   • Focuses on scheduling techniques in cellular assembly systems to enable mass customization in manufacturing.

2. Smart Learning Factory: Network Approach for Learning and Transfer in Digital & Physical Setups

   • Examines a network-based approach to learning and knowledge transfer in smart factories, combining digital and physical environments.

3. Towards a Machine Learning Failure Prediction System Applied to Smart Manufacturing Processes

   • Discusses the development of machine learning models to predict failures in smart manufacturing systems.

4. A Method to Gaze Following Detection by Computer Vision Applied to Production Environments

   • Introduces a computer vision-based method for detecting gaze following to enhance worker safety and efficiency in production environments.

5. Towards a Knowledge-Based Design Framework for Modular Robotic Systems

   • Aims to develop a knowledge-based design framework for modular robotics in manufacturing systems.

6. A Lean Quality Control Approach for Additive Manufacturing

   • Proposes lean principles for quality control in additive manufacturing processes.

7. Integration of PLM, MES, and ERP Systems to Optimize Engineering, Production, and Business

   • Discusses the integration of Product Lifecycle Management (PLM), Manufacturing Execution Systems (MES), and Enterprise Resource Planning (ERP) to optimize processes across engineering, production, and business functions.

8. Analyses and Study of Human Operator Monotonous Tasks in Small Enterprises in the Era of Industry 4.0

   • Analyzes the impact of monotonous tasks performed by human operators in small enterprises and explores solutions within Industry 4.0.

---

Digital Twin Technologies

1. Digital Twin Representations of Concrete Modules in an Interdisciplinary Context of Construction and Manufacturing Industries

   • Focuses on the use of digital twins to represent concrete modules in both construction and manufacturing contexts.

2. Middle of Life Digital Twin: Implementation at a Learning Factory

   • Discusses the implementation of digital twins during the middle phase of product life cycles at a learning factory.

3. A Complete Digital Chain to Enable the Digital Twin of a Shop Floor

   • Proposes a complete digital chain to support the creation of digital twins for shop floors in manufacturing.

4. Implementation of a Digital Twin Starting with a Simulator

   • Describes the initial steps in implementing a digital twin, starting with the use of simulators.

5. Digital Twin and Product Lifecycle Management: What Is the Difference?

   • Explores the differences between digital twins and Product Lifecycle Management (PLM) systems.

---

Internet of Things (IoT & IIoT) in Manufacturing

1. Smart Dust in the Industrial Economic Sector – On Application Cases in Product Lifecycle Management

   • Investigates the application of smart dust technologies in product lifecycle management within industrial settings.

2. Smart Manufacturing Testbed for the Advancement of Wireless Adoption in the Factory

   • Proposes a testbed for smart manufacturing to advance the adoption of wireless technologies in factory environments.

---

Analytics and Data Management in Manufacturing

1. Analytics in the Order Fulfillment Process

   • Focuses on using analytics to optimize the order fulfillment process in manufacturing.

2. Free Text Customer Requests Analysis: Information Extraction Based on Fuzzy String Comparison

   • A method for analyzing free-text customer requests by extracting relevant information using fuzzy string comparison techniques.

3. Data Relevance and Sources for Carbon Footprint Calculation in Powertrain Production

   • Analyzes the relevance of data sources used to calculate the carbon footprint in powertrain production.

4. FMECA-Based Risk Assessment Approach for Proactive Obsolescence Management

   • Introduces a Failure Modes, Effects, and Criticality Analysis (FMECA) approach for managing risks related to obsolescence in manufacturing.

5. i-DATAQUEST: A Proposal for a Manufacturing Data Query System Based on a Graph

   • Proposes a graph-based system for querying manufacturing data effectively.

---

Ontology and Interoperability in Manufacturing

1. Supporting Linked Engineering Data Management of Smart Product Systems Through Semantic Platform Services

   • Focuses on managing linked engineering data of smart products using semantic platform services for better interoperability.

2. Ontology Matching for Product Lifecycle Management

   • Explores ontology matching techniques to improve interoperability and data exchange in Product Lifecycle Management (PLM).

3. An Ontology-Based Concept to Support Information Exchange for Virtual Reality Design Reviews

   • Introduces an ontology-based framework to facilitate information exchange during virtual reality-based design reviews.

4. Initial Approach to an Industrial Resources Ontology in Aerospace Assembly Lines

   • Proposes an initial ontology approach to manage industrial resources in aerospace assembly lines.

---

Tools and Methods for Early Design Phases

1. 3D Sketching in VR Changing PDM Processes

   • Investigates how 3D sketching in Virtual Reality (VR) can change Product Data Management (PDM) processes.

2. A Method to Formulate Problems in Initial Analysis of Inventive Design

   • Proposes a method for formulating problems in the initial analysis phase of inventive design.

3. Using BSC and DEMATEL Methods to Construct a Novel Product Concepts Evaluation System

   • Uses Balanced Scorecard (BSC) and DEMATEL methods to develop an evaluation system for novel product concepts.

4. Knowledge Graph of Design Rules for a Context-Aware Cognitive Design Assistant

   • Introduces a knowledge graph approach to support a cognitive design assistant with context-aware design rules.

---

New Product Development

1. Conceptual Reference Model for the Product Development Process Oriented by Design for Six Sigma

   • Develops a conceptual reference model for product development focused on Design for Six Sigma methodologies.

2. Implementing Secure Modular Design of Configurable Products: A Case Study

   • Presents a case study on implementing secure modular design strategies for configurable products.

3. Addressing Obsolescence from Day One in the Conceptual Phase of Complex Systems as a Design Constraint

   • Discusses how to address product obsolescence as a constraint from the conceptual design phase of complex systems.

---

Aerospace & Manufacturing Case Studies

1. Case Study: Aerospace Cluster

   • A detailed examination of the aerospace cluster, focusing on manufacturing practices and innovations.

2. Rapid Sales Growth Mechanisms and Profitability for Investment Product Manufacturing SMEs through Pay-Per-X Business Models

   • Analysis of how small and medium enterprises (SMEs) in the investment product manufacturing sector can achieve rapid sales growth and profitability through pay-per-X business models.

3. An Analysis of Flexible Manufacturing in Supporting the Development of Smart Product-Service Systems

   • Examines how flexible manufacturing systems support the development and implementation of smart product-service systems.

4. Startup Definition Proposal Using Product Lifecycle Management

   • Proposes a framework for defining and managing startups using Product Lifecycle Management (PLM) principles.

---

Circular Economy & Sustainability

1. Exploring How Design Can Contribute to Circular Economy through Design for X Approaches

   • Investigates how design practices, such as Design for X approaches, can contribute to the circular economy.

2. An Innovative Methodology to Optimize Aerospace Eco-efficiency Assembly Processes

   • Proposes a methodology for enhancing the eco-efficiency of assembly processes in the aerospace industry.

3. A Disassembly Line Design Approach for Management of End-of-Life Product Quality

   • A design approach focused on managing the quality of end-of-life products during disassembly processes.

4. Towards a Data Classification Model for Circular Product Lifecycle Management

   • Develops a data classification model for managing the lifecycle of circular products.

---

Maturity Models & Adoption in Manufacturing

1. Preliminary Analysis of Behavioral Intention to Use a Risk Analysis Dashboard through the Technology Acceptance Model

   • A preliminary study on the intention to adopt risk analysis dashboards, using the Technology Acceptance Model.

2. Challenges of Integrating Social-Lifecycle Sustainability Assessment into Product Lifecycle Management: State of the Art

   • Examines the challenges of integrating social-lifecycle sustainability assessments into PLM systems.

3. A Comprehensive Maturity Model for Assessing the Product Lifecycle

   • Proposes a maturity model for assessing and optimizing the entire product lifecycle.

4. PLM Functionalities in the Fashion Industry: Preliminary Results of a Classification Framework

   • Preliminary results of a classification framework for the functionalities of PLM in the fashion industry.

5. Cross-Industrial PLM Benchmarking Using Maturity Models

   • Analyzes benchmarking techniques across industries using maturity models to assess PLM.

6. A Knowledge-Based Approach for PLM Implementation Using Modular Benefits Dependency Networks

   • Introduces a knowledge-based approach for implementing PLM, focusing on modular benefits dependency networks.

7. Enterprise Architecture Method for Continuous Improvement of PLM Based on Process Mining

   • Discusses using enterprise architecture methods in combination with process mining to continuously improve PLM systems.

8. Blockchains: A Conceptual Assessment from a Product Lifecycle Implementation Perspective

   • A conceptual exploration of how blockchain technology can be applied to product lifecycle management.

---

Model-Based Systems Engineering (MBSE)

1. Analysis of MBSE/PLM Integration: From Conceptual Design to Detailed Design

   • Studies the integration of Model-Based Systems Engineering (MBSE) and PLM from conceptual to detailed design phases.

2. Issues on Introducing Model-Based Definition: Case of Manufacturing Ecosystem

   • Discusses the challenges of introducing Model-Based Definition (MBD) in the manufacturing ecosystem.

3. A New Agile Hybridization Approach and a Set of Related Guidelines for Mechatronic Product Development

   • Proposes an agile hybridization approach, with guidelines, for the development of mechatronic products.

4. A Study of Behavior and State Representation Methods in Modern PLM Systems

   • Investigates methods for representing behavior and states in modern PLM systems.

5. Artificial Intelligence in CAx, MBE, and PLM

   • Explores the role of Artificial Intelligence (AI) in Computer-Aided technologies (CAx), Model-Based Engineering (MBE), and PLM systems.

---

Data Analytics & Applications

1. Data Analytics & Application Challenges in the Childrenswear Market: A Case Study in Greece

   • A case study on the challenges faced by data analytics and applications in the childrenswear market in Greece.

2. Trusted Artificial Intelligence: On the Use of Private Data

   • Explores the ethical and practical aspects of using private data in AI applications.

3. Real-Time Detection of Eating Activity in Elderly People with Dementia Using Face Alignment and Facial Landmarks

   • A system for real-time detection of eating activities in elderly individuals with dementia using computer vision techniques like face alignment.

4. Participative Method to Identify Data-Driven Design Use Cases

   • A participative approach for identifying use cases for data-driven design.

5. PLM Migration in the Era of Big Data and IoT: Analysis of Information System and Data Topology

   • Examines PLM migration strategies in the context of Big Data and the Internet of Things (IoT), focusing on information systems and data topology.

---

Building Information Modelling (BIM)

1. A Quantitative Evaluation Framework for the Benefit of Building Information Modeling for Small and Medium Enterprises Leveraging Risk Management Concepts

   • Proposes a framework for evaluating the benefits of BIM for SMEs, with a focus on risk management.

2. Cross-Pollination as a Comparative Analysis Approach to Comparing BIM and PLM: A Literature Review

   • A literature review using cross-pollination methods to compare BIM and PLM systems.

3. Enhancement of BIM Data Representation in Product-Process Modeling for Building Renovation

   • Focuses on improving the representation of BIM data in product-process modeling, specifically for building renovation projects.

4. Towards AR/VR Maturity Model Adapted to Building Information Modeling

   • Proposes a maturity model for the adoption of Augmented Reality (AR) and Virtual Reality (VR) technologies in BIM.

5. Developing BIM Thinking: Fundamental Objectives and Characteristics of BIM to Think Critically About in BIM Research and Implementation

   • Outlines the core objectives and characteristics of BIM, with a focus on critical thinking for research and implementation.

---

Industrial Technical Contributions

1. Engineering IT Management on End-to-End PLM Structure in the Automotive Sector

   • Discusses IT management in the automotive sector with a focus on the end-to-end structure of PLM systems.

2. Continuous Engineering through ALM-PLM Integration

   • Explores continuous engineering processes enabled through the integration of Application Lifecycle Management (ALM) and PLM systems.