Trends in Manufacturing and Engineering Management: Select Proceedings of ICMechD 2019 Vijayan 9811547459 9789811547454

This completed downloadable of Trends in Manufacturing and Engineering Management: Select Proceedings of ICMechD 2019 S. Vijayan

Instant downloaded Trends in Manufacturing and Engineering Management: Select Proceedings of ICMechD 2019 S. Vijayan pdf docx epub after payment.

Product details:

• ISBN 10: 9811547459
• ISBN 13: 9789811547454
• Author: S. Vijayan

This book comprises select papers presented at the International Conference on Mechanical Engineering Design (ICMechD) 2019. The volume focuses on the different design aspects involved in manufacturing, composite materials processing as well as in engineering management. A wide range of topics such as control and automation, mechatronics, robotics, composite and nanomaterial design, and welding design are covered here. The book also discusses current research in engineering management on topics like products, services and system design, optimization in design, manufacturing planning and control, and sustainable product design. Given the range of the contents, this book will prove useful to students, researchers and practitioners.

Table of contents:

Part I. Advanced Manufacturing Technology
Effect of Process Parameters in Electric Discharge Machining of AZ31 Magnesium Alloy
Desirability Approach Machining Study on Aluminum Composite Through Wire-Cut Electric Discharge Technique
A Comparative Study on Abrasive Water Jet Machining Characteristics of Entry and Exit Layers of Glass and Basalt Woven Polymer Composites
Electrolyte and Machining Parameters Optimization of Wire Electrochemical Cutting of Aluminum/Titanium Diboride Composite
Modeling and Parametric Optimization of Process Parameters of Wire Electric Discharge Machining on EN-31 by Response Surface Methodology
Wire-Cut Electric Discharge Machining on Nickel–Aluminium–Bronze Using Brass Wire Electrode
Part II. Development and Characterization of Metal Matrix Composite
Manufacture, Mechanical Properties and Microstructural Characterization of Aluminium and Iron Metal Matrix Composite Manufactured
Influence of Graphite Particles on Microhardness and Microstructural Behavior of AA7068 Metal Matrix Composites Processed by Powder Metallurgy
Microhardness and Microstructural Behavior of AA7068/SiC Metal Matrix Composites Synthesized by Powder Metallurgy
Optimization of CO2 Laser Cutting Parameters for AA6061/B4C/hBN Hybrid Composites using Taguchi-based Response Surface Methodology
Analysis of Corrosion Resistance in Domestic Water Geysers by Coating Nano-Film Using Thermal Spray Coating
Effect of Multi-walled Carbon Nanotubes Additions on Its Dispersion Characteristics in Titanium Oxides
Evaluation of Process Parameters Influence on the Mechanical Properties of RF Magnetron Sputtered TiC Thin-Film Coating
Effect of Compaction Loads in Machining of Short Carbon Fiber-Reinforced Aluminum Composite
Synthesis and Characterization of Al 7072-Al2O3 Metal Matrix Composites
Erosion-wear Behaviour of 304 Stainless Steel Reinforced with TiN at Elevated Temperatures
A Concise Review of Nano-enhanced Phase Change Materials for Passive Cooling Applications in Buildings
Effect of Silicon Carbide in Yttria-stabilized Zirconia for Thermal Protective Structural Materials
Part III. Structures and Processing of Polymer Matrix Composite
Optimization of Process Parameter in Abrasive Water Jet Machining of Blue-Fired Grain-Reinforced Glass Fiber Polymer Composite
Mechanical Behavior of Raavi and Pineapple Fiber-reinforced Hybrid Polyester Composites
Carbon Fiber Surface Treatment for Enhanced Interfacial Properties: A Review
Preparation and Mechanical Property Analysis of Polymer Matrix Composite Containing Rice Husk and Saw Dust
Investigation of the Mechanical Properties of Polyamide 6 Hybrid Nanocomposites with MWCNT and Copper Nanoparticles
Preparation, Characterization, Image Segmentation and Particle Size Analysis of Cow Bone Powder for Composite Applications
Investigation of Mechanical and Chemical Properties of the Coir Fiber and Wood Powder Reinforced Hybrid Polymer Composite
An Experimental Study on Hemp/Sisal Fiber Embedded Hybrid Polymer Composites
Investigation on Chemical Isolation and Characterization of Cellulose from Delonix regia Fruit Fibers
Experimental Study and Analysis of Defragmented Carbon Nanotubes in Polyacrylonitrile Matrix
Design and Fabrication of Car Door Panel Using Natural Fiber-Reinforced Polymer Composites
Investigation of Physical–Chemical Properties and Evaluation of Optimal Blend Ratio of Rice Bran Biodiesel: A Mathematical Regression Analysis Approach
Wear and Friction Behaviours of Stainless Steel (SS 316) Wire Mesh and Carbon Fibre Reinforced Polymer Composite
Tribological Properties of PEEK Reinforced with Synthetic Diamond Composite
Experimental Investigation on the Mechanical Properties of American Agave and Glass Fibre Reinforced Polypropylene Composites
Influence of Magnesium Hydroxide Fillers on Acoustic, Thermal, and Flame Retardant Properties of Pu Foam
Development and Analysis of GFRP Conical Springs
Effect of Nano and Microfillers in Basalt/Epoxy Composites
A Feasibility Study on Microwave Joining of GFRP Composite Pipes with Interlayer Coupling Agents
Comparative Evaluation of Mechanical Properties of GFRP and Polymer Hybrid Composite
Study of Hexagonal Boron Nitride Particulate as Vibration Behaviour Modifier of Alternate Stacked Glass–Natural Fibre Polymer Composite Laminate
Study of Statistical Distribution and Morphology of Particles in a Polymer Matrix by Foldscope Imaging Technique
Dynamic Mechanical Analysis of Flax Fiber Stacked Polyurethane Blend Epoxy Composites
Part IV. Material Processing Technology
Comparative Study of Ball Nose and Flat End Milling on A356 Alloy/SiCp Metal Matrix Composite
Numerical Modeling of Orthogonal Machining Process Using Smoothed Particle Hydrodynamics—A Parametric Study
Acoustic Emission-Based Grinding Wheel Sharpness Monitoring Using Machine Learning Classifier
Turning Process Characteristics of Aluminium Matrix Hybrid Composite Using Grey Relational Surface Methodology
Corrosion Behaviour of Hot Rolled AA8015 in Natural Seawater at 1.37 µm Surface Roughness
Influence of Tool Profiles on Heat Transfer Analysis in Al-6061 Alloy Using Friction Stir Welding
Tensile, Hardness, and Impact Properties of Amorphous Al–Si–Mg Cast Alloys
Experimental Investigation on the Influence of Tool Geometry in Minimum Chip Thickness of Microendmilling Using Cutting Force Analysis
Temperature and RF Power Effect on the Morphology and Structural Properties of TiC Thin Film Grown by RF Magnetron Sputtering
Effect of Temperature on the Surface Characteristics of Anodized Aluminium Tubes
Experimental Investigation on Heat Pipe-Assisted Cooling During Milling Process of AISI 1040
Development of a Modified Magnetic Moulding Set up for Improved Heat Transfer
Quality Assessment Studies on AA7075 Plate in Hot Rolling Process
Artificial Neural Network and Genetic Algorithm-Based Models for Predicting Cutting Force in Turning of Hardened H13 Steel
Experimental Study of the Effect of TiN–Zn Coated High-Speed Steel Cutting Tool on Surface Morphology of AL1060 Alloy During Machining Operation
Experimental Investigation of Surface Roughness in End Milling of AA6061 Alloy with Flooded Cooling and Minimum Quantity Lubrication (MQL) Technique
Part V. Material Joining Technology
Performance Study of Dissimilar Alloy Joints of SS321 and SS347 Under MIG Welding Process
Effect of Friction Stir Welding Tool on Al–SiC Composites by Varying Tool Pin Profile and Tool Material
Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method
Effect of Process Parameters on Bead Width of 202 Grade Stainless Steel Gas Tungsten Arc Welded Plates Using Response Surface Methodology
Feasibility Study of TIG Welding of AA6063-AA7075 Alloys
Effects of Processing Parameters on Temperature Distributions, Tensile Behaviour and Microstructure of Friction Stir Welding of Dissimilar Aluminium Alloys
Optimizing the Parameters for Friction Stir Welding of an Aluminium Alloy
Machining of ZE41 Magnesium Alloy in WEDM Using Taguchi Approach
Comparative Study of Friction Stir Welding and Underwater Friction Stir Welding on Magnesium ZE41 Alloy
Characterizing the Tensile Deformation Behavior of Friction Stir Welded Dissimilar Joints Using Acoustic Emission Technique
Study of Infrared Thermography on Tensile Behavior of Laser Beam Welded 316LN Austenitic Stainless Steel
Part VI. Production and Operation Management
Evaluation of Ergonomics Issues in Repetitive Scrap Handling Work in Automobile Industries
Reduction of Terminal Rejections and Failure Cost through Kaizen at Shop Floor of a Wire Harness Manufacturing Company
Solving the Flexible Job Shop Scheduling Problem Using a Hybrid Artificial Bee Colony Algorithm
Linear Programming in Market Management Using Artificial Intelligence
Queueing Theory an Index Factor for Production Inventory Control in Automotive Industry—A Review
Design and Analysis of ASRS Using AGV for Rapid Inventory Storage System
Part VII. Optimization Techniques
Multi-response Optimization of Inconel 825 Process Parameters Using LN2 Cooled Zinc-Coated Brass Wire in CNC Wire-Cut EDM
Optimization of Process Parameters During EDM on Inconel Alloy 625
Optimization of Laser Trepanning Parameters for Mild Steel by Taguchi Response Surface Methodology (T-RSM)
Parametric Optimization of Cracked Cantilever Beam Using Genetic Algorithm
Study of the Influence of Reinforcement Parameters on Thermal Conductivity of Magnesium-Based MMCs Through Taguchi’s Orthogonal Array Approach
Finite Element Modelling and Optimisation of Sheet Hydroforming for Cryo-rolled AA5083 Sheets
Selection of Parameterization Method for Fitting of Freeform Curves Using Uniformly Spaced Data
Part VIII. Energy Engineering
Experimental Study of an Axial Turbine for Wave Energy Conversion
Investigations into Nonlinear Energy Sinks for a Stochastic Dynamical Oscillator
A Novel Banana Leaf Waste-Based Activated Carbon for Automobile Emission Control
Analyzing Different Methods to Increase the Natural Period of a Compact Wave Energy Converter
Comparison of Hydrogen Yield from Ball-Milled and Unmilled Magnesium Hydride in a Batch System Hydrogen Reactor
A Review on the Synthesis of Activated Carbon from Natural Resources for Mechanical Applications
Combined Casing Groove and Blade Tip Treatment for Wave Energy Harvesting Turbine
Design and Development of Wind Tunnel to Study Smoldering Combustion
Spatial Location of Renewable Energy Plants: How Good Is Good Enough?
Analysis of Pendulum-Based Nonlinear Energy Sink for Energy Harvesting
Effect of Input Velocity on the Output of Vertical Axis Wind Turbine (VAWT)
Radiative Heat Transfer of Magnetic Nanofluid Flow Past a Porous Inclined Plate: A Mathematical Model
A GA-ANFIS Model for the Prediction of Biomass Elemental Properties

People also search:

trends in manufacturing 2023

trends in engineering industry

trends in maintenance management

a trend in information management

what are the latest trends in manufacturing