Trends in Mechanical and Biomedical Design Select Proceedings of ICMechD 2019 1st Edition by Esther Titilayo Akinlabi, P Ramkumar, M Selvaraj ISBN 9789811544873 9811544875

Trends in Mechanical and Biomedical Design Select Proceedings of ICMechD 2019 1st Edition by Esther Titilayo Akinlabi, P. Ramkumar, M. Selvaraj  – Ebook PDF Instant Download/Delivery: 9789811544873, 9811544875

Full download Trends in Mechanical and Biomedical Design Select Proceedings of ICMechD 2019 1st Edition after payment

 

Product details:

ISBN 10: 9811544875

ISBN 13: 9789811544873 

Author: Esther Titilayo Akinlabi, P. Ramkumar, M. Selvaraj

 This book comprises select papers presented at the International Conference on Mechanical Engineering Design (ICMechD) 2019. The volume focuses on the recent trends in design research and their applications across the mechanical and biomedical domain. The book covers topics like tribology design, mechanism and machine design, wear and surface engineering, vibration and noise engineering, biomechanics and biomedical engineering, industrial thermodynamics, and thermal engineering. Case studies citing practical challenges and their solutions using appropriate techniques and modern engineering tools are also discussed. Given its contents, this book will prove useful to students, researchers as well as practitioners.

Table of contents: 

1. Rigid Logged Coupling: An Improved Coupling with Less Material and Low-Stress Concentration

2. An Efficient Grey Water Stagnancy Handler

3. Experimental Design and Testing of Scale Development Reduction System in Domestic Water Geysers

4. Transient Analysis of Rotor System

5. Investigating the Contact Load Capacity of Asymmetric Helical Gears

6. Close-Proximity Dynamic Operations of Spacecraft with Angles-Only Rendezvous in a Circular Phasing Orbit

7. Optimal Dimensional Synthesis of Rhombus Path Generating Adjustable Four-Bar Mechanism

8. Sensor Fusion for Automotive Dead Reckoning Using GPS and IMU for Accurate Position and Velocity Estimation

9. Optimal Dimensional Synthesis of Double-Semi-circle and Double-Semi-ellipse Path Generating Adjustable Four-Bar Mechanisms

10. Effect of Interference on a Floating Axis Epitrochoidal Hydrostatic Unit

11. Design and Analysis of Rocker Arm Shaft in IC Engine Hino Series for Reduction of Assembling Dismantling Time

12. Kinematic Analysis and Dimensional Synthesis of Filleted-Rhombus Path Generating Adjustable Four-Bar Mechanism

13. Experimental Investigations of Initial Push Forces on an Industrial Trolley

14. Mathematical Analysis of Stiffness of Orthotropic Beam with Hollow Circular and Rectangular Cross-sections

15. Analytical Investigation of the Stiffness of Homogenous Isotropic Mechanical Materials with Different Cross-sections

16. Fatigue Analysis of Vocal-Folds Using Discretized Aeroelastic Model

17. Response of a Layered Composite Beam Subjected to Static Loading Using Point Interpolation Meshless Technique

18. Dynamic Behaviour of Laminated Composite Beam Undergoing Moving Loads

19. Demystifying Fractal Analysis of Thin Films: A Reference for Thin Film Deposition Processes

20. Dynamic Analysis of Rectangular Aluminum Plate Under Transverse Loading Using Finite Difference Algorithm

21. Ballistic Performance of Light Weight Magnesium (AZ31B) and Aluminium (AL 6061) Plates Using Numerical Method

22. Comparison of Energy Absorption Characteristics of the Plain Fold and Spot-Welded Fold Tubes Under Three-Point Bending

23. An Efficient Energy Absorber Based on Welded Fold Tubes for Automotive Applications

24. Finite Element Modelling of a Compression Test on AISI 1016 Cylindrical Steel: A Review

25. Evaluation of Tie Wing Deformation in 0.022 Inch Stainless Steel Orthodontic Bracket—A Finite Element Analysis

26. A Finite Element Analysis to Study the Effect of Various Loading Conditions on the Intervertebral Disc in L4–L5 Section of Lumbar Spine

27. Numerical Simulation of a Small-Scale Shock Tube Using OpenFOAM®

28. Contact Stress Analysis on a Functionally Graded Spur Gear Using Finite Element Analysis

29. Finite Element Analysis of Knee Joint with Special Emphasis on Patellar Implant

30. Simulation and Hardware Implementation of Interleaved SEPIC Converter with Valley-Fill Circuit for HBLED System

31. Finite Element Analysis of a Two-Post Rollover Protective Structure of an off-Highway Motor Grader

32. Investigating the Route to Flutter in a Pitch–Plunge Airfoil Subjected to Combined Flow Fluctuations

33. A Computational Study on the Effect of Supercritical CO2 in a Combustor

34. Design of Shell-and-Tube Heat Exchanger with CFD Analysis

35. Characterization of Rayleigh–Taylor Instability at the Fluid–Fluid Interface

36. Heat and Mass Transfer Analysis of Al2O3-Water and Cu-Water Nanofluids Over a Stretching Surface with Thermo-diffusion and Diffusion-Thermo Effects Using Artificial Neural Network

37. Design of Macro-rough Surface and Its Influence on Side Wall Heated Square Enclosure

38. Performance Enhancement of a Savonius Vertical Axis Wind Turbine with Bio-Inspired Design Modifications

39. Experimental Investigation of Heat Treatment Processes on Dissimilar IS2602-EN9 MIG Welded Joint

40. Feasibility of Al2O3/Water Nanofluid in a Compact Loop Heat Pipe

41. Analysis of Externally Pressurized Thrust Bearing with Inclination Angle Using Yield Stress Fluids

42. Numerical Investigation of Bingham Fluid Flow in the Entrance Region of Rotating Annuli

43. Nanofluids in Improving Heat Transfer Characteristics of Shell and Tube Heat Exchanger

44. Design and Numerical Analysis of Gearless Transmission Used in Small Wind Turbine

45. Experimental Investigation of Unsteady State Heat Transfer Behaviour of Nanofluid

46. Switched Staircase-Type Multilevel Inverter Structure with Reduced Number of Switches

47. Hydro Pneumatic Parking Brake Actuation System for Motor Grader Application

48. Design and Analysis of Feature Primitive Scaffold Manufactured Using 3D-Printer—Fused Deposition Modelling (FDM)

49. Design and Development of Modular Parallel XY Manipulator

50. Design of Hyper-redundant In-Vivo Robot: A Review

51. Effect of Insertion Force for Successful Penetration of a Conical Shaped Microneedle into the Skin

52. Lumbar Discography: Study of Biomechanical Changes in the L1-L2 Intervertebral Disc of the Human Lumbar Spine Using Finite Element Methods

53. C4–C5 Segment Finite Element Model Development and Investigation of Intervertebral Disc Behaviour

54. Simulation and Analysis of Integrated SEPIC-Flyback AC-DC PFC Converter for LED Applications

55. Simulation Study of Shading Effects in PV Array

56. Speech Recognition Using Neural Network for Mobile Robot Navigation

57. Range Sensor-Based Obstacle Avoidance of a Hyper-Redundant Robot

58. Literature Survey on Four-Legged Robots

59. In-Pipe Robot Mechanisms—State-of-the-Art Review

60. Design and Thermal Performance Analysis on Solar Still

61. The Use of Hydrocarbon Refrigerants in Combating Ozone Depletion and Global Warming: A Review

62. Experimental Study of Performance of R600a/CNT-Lubricant in Domestic Refrigerator System

63. Assessing the Predicting Capability of RSM and ANN on Transesterification Process for Yielding Biodiesel from Vitis vinifera Seed Oil

64. Waste Heat Recovery (WHR) of Diesel Engine Using Closed-Loop Pulsating Heat Pipe

65. An Experimental Investigation of Heat Transfer in Heat Exchangers Using Al2O3 Nanofluid

66. Numerical Study of Heat Transfer and Pressure Drop in a Helically Coiled Tubes

67. Comparative Study on the Mechanical Performance of Solid Lubricants Over Peek Polymer

68. ZrB2 Influences on the Dry Sliding Wear Resistance of AA7075 Alloy

69. Investigation on Wear Properties of Nickel-Coated Al2O3P-Reinforced AA-7075 Metal Matrix Composites Using Grey Relational Analysis

70. Optimizing the Tribological Properties of UHMWPE Nanocomposites—An Artificial Intelligence based approach

71. Friction and Wear Study of Laser Surface Textured Ti-6Al-4V Against Cast Iron and Stainless Steel Using Pin-on-Disc Tribometer

72. Tribological Study on Sliding Contact Between Laser Surface Textured Titanium and Aluminium Alloy Under Lubrication

73. Some Studies on Surface Roughness of AISI 304 Austenitic Stainless Steel in Dry Turning Operation

74. Influence of Fiber Orientation on Mechanical Properties and Free Vibration Characteristics of Glass/Hemp Hybrid Composite Laminates

75. Free Vibration Analysis of Functionally Graded Beam with Linearly Varying Thickness

76. Parametric Study of Composite Plate Using Free Vibration Analysis

77. Free Vibration Analysis of Hybrid Composite Beam Under Different Boundary Conditions and Thermal Gradient Loading

78. Computational Analysis of Boring Tool Holder with Damping Force

79. Comprehensive Review of the Effects of Vibrations on Wind Turbine During Energy Generation Operation, Its Structural Challenges and Way Forward

80. Design and Analysis of a Novel Hybrid Car Bumper Using Non-Newtonian Fluid and High-Density Polyethylene

81. Vibration Signature-Based Monitoring on FSW Process and Verification by FEA

82. Power Generation from Hydraulic Shock Absorber Using Piezoelectric Material

83. Static Deformation Analysis with and Without of Piezo-electric Material Attachment in Hydraulic Suspension System

84. Study of Vibration and Tensile Characteristics of Multilayer Composites

85. Influence of Vibro-isolator Attachment for a Jackhammer to Reduce Vibration Discomfort

People also search for:

emerging trends in mechanical engineering pdf
new trends in mechanical engineering
recent trends in mechanical engineering ppt
emerging trends in mechanical engineering mcq pdf
recent trends in mechanical engineering seminar topics

Tags:

Esther Titilayo Akinlabi,P Ramkumar,M Selvaraj,Mechanical,Biomedical Design,Select Proceedings